Hale Farmhouse - Front Elevation_2400

VIEW FLOORPLANS

4

BEDS

4

BATHS

3806

SQ. FT.

4

BEDS

4

BATHS

3806

SQ. FT.

VIEW FLOORPLANS

Plan Details

The Hale Farmhouse is a four-bedroom, five-bath beauty with a three-car garage and two covered porches. The front covered porch opens into a spacious foyer with a study to one side. With a closet and optional access to the 5th bathroom, the study could easily be converted to a 5th bedroom or guest suite.

The foyer leads into the open concept kitchen, family, and dining area with an expansive island, ample storage, generous pantry, and space for a large dining table.

The family room boasts exposed beams and a fireplace and opens to an inviting covered porch in the rear of the home. The main floor master suite includes his and hers closets, a soaking tub, and a shower.

Entry through the garage leads to a mud bench and a spacious laundry area with ample room for a home office and a second refrigerator. A unique enclosed storage closet is in the rear of the garage.

The second floor of the Hale features a bonus room and three bedrooms, each with private baths and walk-in closets, as well as an optional storage area.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
  2. First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  4. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  5. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  6. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 59' w x 66' d

  • 3,806 square feet
  • Covered porches
  • Large laundry room with home office
  • Study can become first floor guest suite
  • Open concept living area
  • 10′ ceiling heights on main level, 11′ Family Room with coffered ceiling, 9′ second level
Choose an option
Full size PDF - Garage Left
$2,854.50
Full size PDF - Garage Right
$2,854.50
Pricing Set - Garage Left
$1,903.00
Pricing Set - Garage Right
$1,903.00
Printable Brochure - Garage Left
$10.00
Printable Brochure - Garage Right
$10.00
Clear

Questions? 615-571-2040