Everett - Front Elevation_2400

VIEW FLOORPLANS

4

BEDS

4.5

BATHS

4577

SQ. FT.

4

BEDS

4.5

BATHS

4577

SQ. FT.

VIEW FLOORPLANS

Plan Details

The Everett is a four bedroom, four and two half bath traditional American Farmhouse with three garage bays.

With two covered porches, four fireplaces, and ample storage, this spacious open concept home boasts details and extra features that will make any homeowner feel like it was designed just for them. From the large covered front porch, the foyer leads to a study with a fireplace, or to the dining room with a fireplace of its own. Through the foyer, the open kitchen and family area has a large island, room for a family table, and a fireplace surrounded by built ins.

The kitchen has ample storage and a walk-through butler’s pantry to the dining room as well as a traditional pantry. A spacious covered porch leads from the family room into the backyard, and includes a fireplace and a grill porch to the side. The master suite is privately located behind the family room and boasts an expansive closet, a soaking tub, an enclosed shower, and access to the study at the front of the home.

The friend’s entry from the porte cochere leads to a guest suite that includes a full bathroom. Behind the kitchen, the entry from the two-car garage includes a mud bench, enclosed laundry room, and a powder room.

The open stairs to the second level from the foyer lead to a central hallway. Off of the open second floor hall, there are two bedrooms, each with private full baths and walk-in closets, as well as a bonus room with a powder room.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 99' w x 95' d

  • 4,577 square feet
  • Porte cochere connector
  • Open layout kitchen, breakfast and family room
  • First floor guest suite
  • Large covered porches
  • 10′ ceiling height on lower level, 9′ second level
Choose an option
Printable Brochure
$10.00
Full Size PDF
$3,432.75
Pricing set
$2,288.50
Clear

Questions? 615-571-2040