Burlington - Front Elevation_2400

VIEW FLOORPLANS

4

BEDS

4.5

BATHS

4807

SQ. FT.

4

BEDS

4.5

BATHS

4807

SQ. FT.

VIEW FLOORPLANS

Plan Details

This English Romantic design has four bedrooms, four and a half baths, a two car garage, and beautiful details. Foyer entry off of the front covered porch leads to the open concept family room and kitchen. A study sits privately off of the foyer in the front of the home. The family room features built ins and a fireplace, with vaulted ceilings and exposed beams.

Access to the large rear covered porch from the family room shows off an additional fireplace and an outdoor bar area, complete with a grill. The kitchen has a large island and a spacious pantry, with plenty of cabinets and countertops. A media room behind the kitchen has built ins, a wet bar, opens to the covered porch, and steps down to the golf cart garage.

Entry to the home from the two car garage is through the mud room between the kitchen and family room. The luxurious master suite also has covered porch access, and boasts a soaking tub and separate shower, a private toilet, a sauna, and an expansive closet. The large downstairs laundry room is accessible from the master closet as well as the foyer area.

On the way upstairs, a window seat in the landing is a great place to read or relax, and an open railing on the second level looks over the living area below. Three upstairs bedrooms each have a walk in closet and full bath. A linen closet, additional laundry room, and convenient walk in storage complete the second level of this home.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 90' w x 76' d

  • 4,807 square feet
  • Main level media room
  • Large master suite with laundry room access
  • Sauna
  • Expansive back porch with outdoor kitchen
  • Generous home office space
Choose an option
Printable Brochure
$10.00
Full Size PDF
$3,605.25
Clear

Questions? 615-571-2040