Brookledge - Front Elevation_2400

VIEW FLOORPLANS

5

BEDS

5.5

BATHS

5821

SQ. FT.

5

BEDS

5.5

BATHS

5821

SQ. FT.

VIEW FLOORPLANS

Plan Details

This grand estate features 5,821 square feet, 5 bedrooms and five and a half baths, with 3 garage bays and 4 covered porches. The colonial revival style showcases the Jack arches over large windows and dentil moldings.

The expansive foyer opens to a formal dining room with a butler’s pantry leading to the kitchen. The well-designed, bright kitchen is the heart of the home. A home office and private covered porch are tucked off the breakfast room.

A central fireplace anchors the family room which opens to a covered porch with its own fireplace. A private first floor bedroom suite is perfect for guests. The friend’s entry lends access to the mud bench and laundry room large enough for an extra fridge. The master suite has covered porch access through french doors.

On the second floor are three generously sized bedroom suites and a bright, large bonus room.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 94' w x 91' d

  • 5,821 square feet
  • 3 covered porches
  • Large upstairs Bonus Room
  • Expandable space
  • 10′ first level ceiling heights, vaulted Master Bedroom, barrel vaulted Master Bath, coffered Family Room, 9′ second level ceiling heights
Choose an option
Full Size PDF
$4,365.75
Printable Brochure
$10.00
Pricing set
$2,910.50
Clear

Questions? 615-571-2040