Auburndale - Front Elevation_2400

VIEW FLOORPLANS

5

BEDS

5.5

BATHS

5571

SQ. FT.

5

BEDS

5.5

BATHS

5571

SQ. FT.

VIEW FLOORPLANS

Plan Details

Step into this five-bedroom, five and two half bathroom brick Modern Farmhouse home and you’ll never want to leave!

This open-concept, ultra-functional plan boasts a spacious kitchen with a large island and ample storage space. The butler’s pantry connects the kitchen to the expansive dining room, and a generous traditional pantry is located just off the kitchen on the way to the laundry room and a large private office. The friend’s entry is located here, with easy access to the office and stairs up to the bonus room.

Across the kitchen island, the family room has sliding doors that open onto the covered porch, creating an even larger indoor / outdoor living space featuring a fireplace and dining area.

The master suite is nestled behind the living room with access to the outdoor living area, a spacious bathroom, and generous his and hers closets. The main floor guest room is located at the front of the home with a private bathroom and walk in closet.

From the entry foyer, stairs go down to the basement or up to an open-railed balcony overlooking the family room below. Three upstairs bedrooms each have their own full bathroom and walk in closet. The separate upstairs space over the four-car garage is home to a large bonus room, a full bathroom, and a perfectly private sixth bedroom.

The partially finished basement shown includes a rec room and powder room, as well as a large future space for potential expansion.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 80' w x 118' d

  • Modern Farmhouse style
  • Vaulted ceilings
  • Expansive kitchen
  • Option for +887 Bonus Room and 6th bedroom suite
  • Basement option +1620 square feet
  • 10′ first floor ceiling heights with 11′-6″ Kitchen and Breakfast Room, vaulted Family Room, 9′ second floor ceiling heights
Choose an option
Full Size PDF
$4,178.25
Pricing set
$2,785.50
Printable Brochure
$10.00
Clear

Questions? 615-571-2040