ashford

VIEW FLOORPLANS

5

BEDS

5

BATHS

5255

SQ. FT.

5

BEDS

5

BATHS

5255

SQ. FT.

VIEW FLOORPLANS

Plan Details

Featured as a 2016 Nashville Parade Home, the Ashford plan won People’s Choice Best of Show, Best Master Suite, Best Kitchen and Best of Show.

This stunning two-story open concept farmhouse features five bedrooms, five bathrooms, and three garage bays. Front and rear covered porches allow for seamless indoor and outdoor living, with the living room wall opening fully onto the rear porch.

The master suite is on the main floor, with a spacious closet and access to a generous laundry room. The kitchen boasts a large island, breakfast nook, and a butler’s pantry walk-through to a separate dining room. Your guests will stay comfortably on the first floor with close access to the kitchen and a walk-in closet of their own.

The second story of the Ashford is home to three bedrooms, each with walk-in closets and private bathrooms. The upstairs also contains a bonus room, a theater room, and a large walk-in storage.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 80' w x 76' d

• 5,255 square feet
• First floor guest suite
• Large utility room with laundry pass
• Luxury master bath with shower for two
• Butler’s pantry with wine storage
• Workshop

Choose an option
Full Size PDF
$3,941.25
Ashford - Full size PDF set
Printable Brochure
$10.00
Ashford - Printable Brochure
Clear

Questions? 615-571-2040