Ardmore - Front Elevation_2400

VIEW FLOORPLANS

4

BEDS

3.5

BATHS

4489

SQ. FT.

4

BEDS

3.5

BATHS

4489

SQ. FT.

VIEW FLOORPLANS

Plan Details

The Ardmore is a four bedroom, three and two half bath craftsman style plan with three covered porches and three garage bays. Entry through the foyer leads to an open-concept kitchen and family area, with the kitchen uniquely placed at the front of the home. With a large island, and an office and generous pantry hidden behind cabinetry, this home is all about the details. The spacious family and dining area contain built ins, a fireplace, and access to a large covered porch with a fireplace at the rear of the home. Also off of the foyer is the guest suite with a full bathroom. The garage entry space includes a coat closet, utility room, and powder room.

Nestled behind the kitchen are the master suite and the stairs for second floor access. The inviting master suite boasts large his and hers closets, a spacious shower, and a door to the rear covered porch.

On the second level, two large bedrooms share a Jack and Jill bathroom. Each bedroom has a window nook, perfect for reading or relaxing. A large bonus room connects to a unique upstairs covered porch with an optional bar area. A large storage closet and two generous walk-in attic spaces finish off the upper level of this functional and beautiful home.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

Our home plan packages offer a complete design of our homes. However, due to the uniqueness of each building site, our Construction Documents are not fully engineered to meet the requirements of each local building code, specific regional conditions, and individual building site. The plans are intended to indicate design intent and basic construction detailing. It is your responsibility to ensure that you have obtained the proper professional assistance to provide standard construction details and practices, which will result in a structurally sound and weatherproofed finished product. Variations in standard sizes (i.e. windows and doors), thicknesses, types and uses of different materials can change details. Local codes, ordinances, regulations, foundation requirements, and the layout of mechanical, electrical and plumbing may also require changes to the details.

What’s not included:

  1. Architectural and Engineering stamps – Some cities and states require a licensed architect or engineer to review and stamp a set of Construction Documents. If your local building department requires one, you will need to engage a local architect or engineer for review and stamping.
  2. Site-specific foundation plan – The included foundation plan is meant to serve as a basic guide for a typical foundation and is not site or location-specific. Sailer Design LLC recommends that you have a local designer or licensed engineer to review the plans and provide a site-specific foundation plan as necessary.
  3. Heating, plumbing and electrical plans – Due to variations in climate and building codes, these should be supplied by local contractors. We suggest you have a local electrical engineer, mechanical engineer, or builder provide these drawings as required for permits and construction.
  4. Material quantity list – Once your personal selections are made (types of windows, doors, exterior materials, etc…) this list should be obtained from your contractor or local building materials supplier.
  5. Material selections – Final material selections are the responsibility of you and your builder, including proper installation.

What’s included:

  1. Foundation Plan – ¼” scale: Documentation of the footings, foundation walls, and basic structure. A licensed structural engineer may be required at the Owner’s expense.
    First Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  2. Second Floor Plan – ¼” scale: Location and sizes of rooms, door and window sizes, dimensions, and notes of special concern.
  3. Roof Plan – ¼” scale: Documentation of the proposed roof form indicating slopes and special roof structures and their locations.
  4. Elevations – ¼” scale: Front, rear, right and left side exterior elevations. Documentation of the exterior design with indications of heights, materials, and details.
  5. Building Details – 1” scale: Selected exterior details (cornice details, porch details, etc.).

 
READ MORE >

Highlights

overall dimensions 79' w x 93' d

  • 4,489 square feet
  • Kitchen looks out to the front
  • Hidden office
  • First floor guest suite
  • Covered rear porch with master access
  • His and Hers walk-in closets
Choose an option
Full Size PDF Set
$3,364.50
Ardmore - Full size PDF set
Printable Brochure
$10.00
Clear

Questions? 615-571-2040